Caractéristiques techniques
| Features\Name | phyCORE-i.MX 7 | phyBOARD-Zeta Linux Kit | |||
|---|---|---|---|---|---|
| Processor |
i.MX 7Solo / i.MX 7Dual |
i.MX 7Dual | |||
| Architecture | ARM Cortex-A7 / Cortex-M4 | ARM Cortex-A7 / Cortex-M4 | |||
| Clock frequency | 1 GHz + 200 MHz |
Dual 1 GHz + 200 MHz |
|||
| MEMORY | |||||
| NAND Flash | up to 8 GB | - | |||
| NOR Flash | up to 16 MB | - | |||
| eMMC | up to 128 GB | 4 GB | |||
| DDR3 RAM | up to 2 GB | 1 GB | |||
| EEPROM | 4 kB | 4 kB | |||
| INTERFACES | |||||
| Ethernet | 2x 10/100/1000 Mbit/s | 2x 10/100/1000 Mbit/s | |||
| USB | 2x OTG, 1x Host | 1x OTG, 1x Host | |||
| UARTs | 7x | via Expansion Connector | |||
| RS232 | - | 1x | |||
| CAN | 2x | 1x | |||
| PCIe | 1x | 1x | |||
| I²C | 4x | via Expansion Connector | |||
| SPI | 4x | via Expansion Connector | |||
| MMC/SD/SDIO | 3x | microSD Card | |||
| PWM | 4x | via Expansion Connector | |||
| A/D | yes | via Expansion Connector | |||
| LCD | TTL 24-bit, MIPI DSI | via optional Display Adapter PEB-AV-02 | |||
| Touch | external | via optional Display Adapter PEB-AV-02 | |||
| Audio | I²S | via optional HDMI Adapter PEB-AV-01 | |||
| Camera | MIPI CSI | via Expansion Connector | |||
| HDMI | - | via optional HDMI Adapter PEB-AV-01 | |||
| RTC | yes | Backup battery | |||
| Power Supply | 3.3 V | 5 V | |||
| Dimensions | 41 mm x 50 mm | 72 mm x 105 mm | |||
| Connector | Samtec 0.5 mm pitch (240 pins) | Samtec 0.5 mm pitch (240 pins) | |||
| Temperature range | X Temp | C Temp | |||
| SOFTWARE | |||||
| Operating System | Linux 4.1.15 | Linux 4.1.15 | |||
| Distribution | Yocto 2.1 (Krogoth) | Yocto 2.1 (Krogoth) | |||
| BSP/ Image | BSP-Yocto-FSL-iMX7-PD17.2.1 | BSP-Yocto-FSL-iMX7-PD17.2.1 | |||
| Kit Content |
phyCORE-i.MX 7 System on Module, phyBOARD-Zeta Carrier Board, Debug Adapter, Power Supply, Linux Yocto BSP |
Documentation phyCORE-i.MX 7 Téléchargement
Pour le support de nos plates-formes, le choix de PHYTEC s'est porté sur la distribution Yocto.
